UlincosMomentary Pushbutton Switch U19C3 1NO1NC Black Metal Shell with 12V Green LED Ring Suitable for 19mm 3/4" Mounting Hole (Green)

Bought this to use with an electric washer fluid system in my '68 VW Beetle. Mounted this in the dash (switch needs a 19mm / 3/4 " hole) and wired it up so the blue LED comes on when the button is pressed and washer fluid is being sprayed. Switch works great, has a nice "click" sound when engaged/disengaged. Comes with wiring diagrams showing both LED-always-on and LED-on-with-switch configurations. This switch does NOT come with a removable wiring connector but I had no problems soldering wires to the connections. Back edge of the switch's "face" has a rubber gasket which is nice, and the securing nut needs a 22mm socket.

I got this to compare to the latching version. I wish they made a momentary version with non-flush button (like the latching version). This switch is perfectly acceptable if you are ok with a flush button. For my purposes, it's 1 star -- but I won't penalize the product because I got it simply to try it out.

Bought this (and the wiring connector) to add a push button start to a car with an intermittent ignition-related starting problem. Instructions were easy to follow, I wired it up so the LED would turn on when the button is pressed, it works great and was easy to set up.

These switches are extremely clean looking and the quality is very good. I recommend ordering the pig tail harness for these switches. Extremely happy once I found these switches.

This momentary switch was not too terible bad feeling in use but the latching look alike mates to it which I got 5 of were total crap, clunky feeling 99 cent switch's being scalped for 9 dollars. Look real nice feel like really cheap toy quality when you press to activate and de-activate.

Buy the wire harness too!

If you want the led ring to light up with your headlights all I did was solder the C terminal to the - terminal. Then the NO terminal is for the load (a horn in my case) and the + terminal I taped from a light bulb behind my dash that turns on with my headlights.

No issues, used compatible wiring connector and it fit perfect. Planning additional purchases in the future

I really wish that FACT was indicated in the description as I would NOT have purchased this product. I searched for a long time to find this extremely rare connector. Finally by chance and a lot of investigating (and a few useless purchases of the wrong sized connectors-NOT REFUNDABLE).Well, with that off my chest...I will help you all....here are the connectors:Certified Female Disconnects 16/14 AWG .110 Tab SKU 020-6929-8 @ CDN TIREI will attempt wire this switch in coming days....hopefully it works!!

The one I got must have been defective. Tried multiple ways of wiring with/without LED, but never got it working with anything.

Good quality, easy to install!!100 Recommended!!

As advertised however would have found it very helpful if instructions included the size of the wire connector (clip) to use rather than guessing. Would recommend this item.

Nice switch. Feels durable.