ASUS ROG Strix LC 360 White Edition All-in-one Liquid CPU Cooler with Aura Sync RGB, and Triple 120mm Addressable RGB Radiator Fans

UPDATE: I paid to have the cooler replaced with an RMA and it cools perfectly now. The AI overclocked the cpu to 4.8 gigs and it idles at 29C on average. It maxes at 51C at 4.8 gigs. I had it on 4.9 gigs on the hard game and it maxed at 55C. I leave it on the AI settings.The Armoury Crate works great now that it got fixed and upgraded. It shows the temps really well.UPDATE: Cooler went bad. CPU temps suddenly jump 25C for no reason at all then idles in the 60 C to 70C range instead of 35C to 41C. ASUS says it is air bubbles or blockage and gave me an RMA. Now I am out of using my comp for a month and have to pay shipping and then to have it reinstalled. I will probably buy a new one in white because you cannot buy replacement fans and I cannot do without my computer for a month.Beware of bad fan issues. One of the fans on my cooler stopped lighting up and working from a loose rgb wire connection. I had to research a new fan before I fixed it. No working fans per specs of 80 cfm are available for sale on amazon and ASUS does not sell replacement fans. 63 cfm was the best 120mm rgb fan I could find on amazon.If your fan goes bad you just have to buy a new one and the reviews say they go bad. The bad reviews also show that many of the cooler fans went bad or did not display the rgb colors on the color.

This product was exactly what I needed to finish my build. Interesting enough in a NZXT case this two fan system fits better than a NZXT 1 fan liquid cooler.It was easy to install and only takes a few minutues. Works right out the box with the Aura software and keeps the cpu cool.My only advice is not to over screw anything as I did break off a screw on the back side that holds the radiator onto the case. This basically means don’t over screw as the unit is fine but the screw head came off.In comparison to the NZXT 1 fan, that tubing port used onto my video card or pressed onto the glass so much that it almost wouldn’t close.This fan seems to have more flexible cables and tubes which work better in my case. Also it looks great to have all ROG STRIX ASUS parts.

Almost no noise, works great with my ASUS x570 TUF mobo. The fans have 2 connections: 4 pin PWN for fan speed control and addressable RGB that works great with aura sync software. Idle temps are cool, and even under max load temps stay in the 70-80 degree F range with my R5 3600. I have had no problems so far. Installation was painless, and it overall looks great! (Also good to note that it comes with pre-applied thermal paste.)

Completely silent, no bubbling sounds, no coil whine from the pump, good thermals, love the aesthetics. Excellent AIO.Edit:I did change the included fans for two Arctic P12 PWM that I already had because the included ROG fans sounded like my case was going on a trip to the moon when spinning at full speed, to loud for my liking. Love the Arctic P12 PWM btw, they have really nice static pressure, are pretty quiet at full RPM and you cant even hear them at low ones, not to mention the price! You can get a pack of 5 for only 30 bucks!

Great product. But you pay for the name and I was a bit disappointed in the radiator condition upon arrival.1) this is a very clean looking and high functioning 360 mm io.2) keeps my i9 9900k 5-10 c cooler than my old 240 mm cooler master.3) it is pricey. There are other options that would fit my needs and be cheaper, but as you can see I went with an asus tuff gaming tower ,white and wanted to match my cooler.4) while the boxing and quality of pretty much everything is what you would expect from asus , top notch, I was very disappointed to see the fins of the radiator folded in in several spots and pretty bad in a couple. I am an HVAC tech and was not afraid to go ahead and take a controls screw driver and bend them back straight. It is crucial for any radiator to have good flow through its fins and a brand new radiator should be perfect. So yea I was a little hurt after spending that much on a top notch flashy set up to see bent fins. But I got it straight and fully functional.5)I don’t notice any increase in fan noise over my cooler master unless it really ramps the fans up. But even under load playing warzone I don’t exceed 50-60c at fans running 60-70% with the i9 over clocking close to 5.2 mghz6) the rgb header for the fans is 3 pin beware. I use an asus z390-a mobo and while it’s perfect for my needs it only has 2 4 pin headers. I had to get an adapter, which was fine it allowed me to use my led backlights on my monitors off ICUE which I use to run my ram rgb’s so all the case fans and back lights run on the same address .... so that could be better but it’s nice being able to control them all on one piece of software.7) the io pump rgb cannot be controlled the way I have my setup. It is a static color using icue for some reason. If I use aura sync I can change it but I prefer using one piece of software. Maybe this will change in a future software update , the pump rgb also plugs into a usb slot on your mobo.

The media could not be loaded. Used in full Asus build inside helios case. Excellent temps under load with the thermal paste that comes pre applied. I frequent seeing 46c-50. 25-30 idle. Very quiet (to me at least). This is a big cooler. Make sure you have the space. The lights are great, everything synced up nice with armory crate. Shipping was fast. It's my first build ever and assembly was quite easy for me. Its be nice if Asus made fans with rgb so everything could match if you want more rgb fans. No complaints only compliments.

Really easy to install even though the instructions were essentially useless. Once I got it installed I found that the pre-applied thermal paste was not very good. Once I swapped to Arctic MX-4 it ran cool as a cucumber. I would highly recommend this just make sure if you would like to use include RGB fans that your motherboard has a three pin 5V header. My motherboard only has 12 V four pin so I used different fans. I would highly recommend this cooler for it’s easy installation and Awesome temperatures. I’m using this with a 9900K over-clocked to 5 GHz and my max temperatures are in the 60s. I really like the white color scheme to.