🚀 Power Up Your Performance!
The NEMIX RAM 128GB Kit (4x32GB) DDR4-3200 is a high-performance memory solution designed for servers and workstations. With a speed of 3200MHz and ECC unbuffered technology, it ensures reliability and efficiency for demanding applications.
| RAM | 128 GB DDR4 |
| Memory Speed | 3200 MHz |
| Brand | NEMIX RAM |
| Item model number | ME25600-328K04-G |
| Item Weight | 4.2 ounces |
| Product Dimensions | 8 x 3 x 1 inches |
| Item Dimensions LxWxH | 8 x 3 x 1 inches |
| Color | Gold |
| Computer Memory Type | DIMM |
| Voltage | 1.2 Volts |
| Manufacturer | NEMIX RAM |
| ASIN | B084DBQKQZ |
| Date First Available | January 31, 2020 |
J**N
Works in QNAP NAS
These 4 x RAM sticks worked right out of the box. In a QNAP NAS.
L**K
Rare DDR4-3200 ECC UDIMMs
UPDATE: Tightened timings. I've been running mine perfectly fine for over a month at DDR4-3600 22-22-22-52-1T 1.35V after passing 4 passes of memtest86+. Basically stock SPD 3200 timings at 3600 at 1.35V (up from stock 1.2V). I may try tightening by 2 again.There isn't really much choice if you need relatively fast DDR4-3200+ ECC UDIMMs for AMD TRX4/TRX40 Threadripper platform, as ECC RDIMMs and RLDIMMs are not supported. 8x 32GB will max out maximum supported TRX4/TRX40 platform capacity of 256GB. These come with default SPD of DDR4-2666 if you boot on Auto DDR4 parameters in your BIOS. You can then increase memory to DDR4-3200 in your BIOS. Make sure to disable XMP/AMP memory profile support in BIOS as mine wouldn't POST with it enabled at DDR4-3200. At DDR4-3200 SPD timings are 22-22-22-52-1T 1.2V. I'm running mine perfectly fine at DDR4-3600 24-24-24-56-1T 1.35V passing 4 passes of memtest86+. I don't recommend going above 1.35V because newer higher-density higher-capacity lower lithography memory cells have lower Vmax and these come with no heat-spreaders. I have super-fast binned Samsung B-die non-ECC 16GB dual-rank DDR4-3200 14-14-14-34-1T 1.35V modules I ran at DDR4-3600 16-17-17-17-1T 1.45V and memtest86+ benches these NEMIX modules 15-20% slower in throughput and 20% higher latency than my super-fast binned Samsung B-die kit at DDR4-3600. I use NEMIX ECC RAM with AMD Threadripper 3970X on workloads that take hours to days to complete and eat up a lot of RAM (currently up to 90GB allocated out of 128GB, my previous 64GB capacity caused heavy memory swapping and SSD thrashing). So far I have no problems with this NEMIX ECC RAM. If you run lengthy workloads that require in excess of 64GB, ECC UDIMMs is a no-brainer requirement.
T**M
does not work
motherboard is ASUS TUF GAMING B550M-PLUS WIFI IICPU AMD Ryzen 7 5800Xdoes not bootkingston DDR4 ECC (KSM32ES8/16MF) works just fine
J**S
Not working for me
Crashing on an asrock rack x470 board, will return
K**H
Works well with 1st gen Threadripper
I bought one set and it works great with my Threadripper 1920x in an ASRock Taichi x399, so I got a 2nd set for a total of 8x32GB. All good!I will note that these did NOT work with an ASRock EPYCD8 and 1st gen Epyc, but I don't know that it's the RAM's fault. That board seems to be picky and only likes Crucial.
Trustpilot
5 days ago
1 day ago