20pcs 0402 0603 0805 1206 Pre Wired SMD LED Light Emitting Diode Micro Litz Length 7.8in. Soldered White Red Green Yellow Blue Orange Pink UV (20pcs DC 3V 0402 White Prewired Mini Lights)

Very nice LEDs - very bright and good color balance.

I have bought from this supplier a few times. I have not had any failures. I've used 0402 and 0805 in white and red for various model projects. They are a bit fiddly because of their small size and I have old eyes issues. I can't imagine soldering to these tiny SMD, I'm so glad they are pre-wired.

Designed and built a Lithophane Beer Tap Handle with 4 of these. Just off one 3v coin battery it has not had to change the battery for a long time. And once even left on overnight and still working.The wires are very very thin, but you can strip the ends with a knife and thumb. Don't slice, just pull the insulation off. Wire strippers probably are not going to work, I don't have any that will.Just remember that these are 3v, so if using a different color will have to add some resistors to drop the voltage if less than 3 volts. I used 4 of these in parallel to a single coin battery and have been working great.

Ordered these LEDs to place inside my model. The diode itself is under 1mm and the pre-soldered wire is approximately 200mm long. The wire is very, very thin. I don't know how thin it is exactly but I estimate anywhere between 26 to 30 AWG. The LED is quite bright for something it's size. I would not recommend running the diode past 3.0V DC.

Love these! I use them to add custom lighting to all of our LEGO modular buildings and they are awesome for that! Seller provides excellent customer service. Buy with confidence.

I use these leds all the time for my locomotives in ho scale and they work wonders though you need to buy the right resistors they need to be the color brown and red black and gold stripes on them, they must be 1k between 1/4 or 1/2 watt type as well. great product keep up the great work.

These LEDs are great for modeling realistic building interior lighting and exterior ambient lighting, and accessory lighting for model trains like ditch lights, ground lights, step lights, and cab interiors. These are not high K blueish white LEDs like you would see in newer car headlights and newer streetlights. These have a nice warm pure white glow when viewed straight on and have a slight golden tint when viewed at an angle, so be sure to mount them with the flat surface facing perfectly perpendicular to what you are illuminating.

I really did not know what to expect as I plan to use this for a project. When they came it looked like 2 fine pieces of wire and I was concerned as to how bright the LED would be. Once I applied a voltage across the terminals I was amazed at how awesome this product was. This allows me to fit the light in tight spaces with minimal weight. The light output was tremendous for the size. I would definitely buy again!